2PCS Thread Stainless Steel Ball Valve 1000WOG

2PCS Thread Stainless Steel Ball Valve 1000WOG

Basic Information Model NO.: Q11F Material: Stainless Steel Connection Form: Thread Driving Mode: Lever,Worm Gear,Pneumatic,Motor Nominal Pressure: 1000wog 2000wog Channel: Straight Through Type Structure: Floating Ball Valve Type: Floating Ball Valve Function: Open-Close, Temperature: Normal...

Product Details

Basic Information

Stainless steel threaded ball valve, the opening and closing member (sphere) is driven by the valve stem and rotates around the axis of the square ball valve. It can also be used for fluid regulation and control. The hard-sealed V-ball valve has a strong shear force between the V-shaped core and the metal seat of the hard-welded carbide alloy. It is especially suitable for fiber-containing, micro-solid particles. Etc. The multi-way ball valve not only can flexibly control the confluence, splitting, and flow direction switching of the medium, but also can close any channel and connect the other two channels. This type of valve should generally be installed horizontally in the pipeline.

Characteristics

1. Wear resistance; since the valve core of the hard seal ball valve is alloy steel spray welding, three-piece ball valve Three-piece ball valve The seal ring is alloy steel surfacing, so the hard seal ball valve does not cause too much wear when switching. (It has a hardness coefficient of 65-70): 2. The sealing performance is good; since the sealing of the hard-sealed ball valve is manual grinding, it can be used until the valve core and the sealing ring are completely matched. Therefore, his sealing performance is reliable.

3. The switch is light; since the bottom of the seal ring of the hard seal ball valve uses a spring to tightly hold the seal ring and the valve core, the switch is very light when the external force exceeds the preload of the spring.

4. Long service life: It has been widely used in petroleum, chemical, power generation, papermaking, atomic energy, aviation, rocket and other departments, as well as people's daily life.

  • Model NO.: Q11F

  • Material: Stainless Steel

  • Connection Form: Thread

  • Driving Mode: Lever,Worm Gear,Pneumatic,Motor

  • Nominal Pressure: 1000wog 2000wog

  • Application: Industrial Usage, Water Industrial Usage, Household Usage

  • Size: 1/2"-4"

A. Size 1/2 inch to 4 inch.

B. Casting Material: WCB CF8 CF8M CF3 CF3M etc.
C. Seat Material: PTFE RPTFE RTFE PPL
D. End connections by SW BW NPT, BSPT, BSP, PT, DIN2999 ETC 
F. Designed and tested to ASME B16.34 & API 598
G. 1000-2000WOG Temperature: -40- 150(Degrees Celsius)
H. Control device: Lever. Pneumatic. Hydraulic. Motorized

Inquiry